1	CAMSETUI.HLP
2	Error
3	Internal error occurred.
4	Error
5	Communication error occurred.
6	Error
7	Insufficient memory.
8	Confirm
9	The settings have been changed. Save settings?
10	Confirm
11	Contents were modified. OK to exit?
12	Error
13	Error saving file.
14	Error
15	Error loading file.
16	Error
17	Unsupported file version.
18	Untitled
1100	Basic Settings
1101	Confirm
1102	Warning: This will format the Memory card inserted in the camera.
\nFormatting erases all existing data on the Memory card.
\nClick [OK] to start formatting the Memory card or press [Cancel] to exit.
1103	Warning: This will format the Memory card inserted in camera slot %s.
\nFormatting erases all existing data on the Memory card.
\nClick [OK] to start formatting the Memory card in camera slot %s or press [Cancel] to exit.
1104	AM
1105	PM
1106	Error
1107	Error setting time
1108	The entered date is invalid.
1109	255
1110	Camera Settings
1111	Camera date settings exceeds the valid range (up to the year 2030),
\nDate and time will be set to PC settings.
1112	The system time of your PC is out of supported year,
\nthe system time can not be set.
1114	Installed
1115	Not Installed
1200	File Settings
1300	Detailed Settings
2000	Exposure Functions 1
2200	Exposure Functions 2
2300	AF Functions 1
2400	AF Functions 2
2500	Drive Functions
2600	??????
2700	Other Functions 1
2800	Other Functions 2
2900	Combination
2901	C.Fn-%02d-%d  
2902	:  
2903	Saved in file: %s
\n
2904	Current settings: Applied to camera.
\n
\n
2905	Current settings: Not applied to camera.
\n
\n
3000	The parameter set is not on the camera.
\nClick the [Add Set] button to add a set
\nthen specify the parameters.
3001	User-defined tone curve not registered.
3002	Warning
3003	 Low
3004	 Low
3005	 Normal
3006	 High
3007	 High
3008	Set Deletion Confirmation
3009	This will delete from camera %s.
\nOK to proceed?
3010	Error
3011	Error setting parameter sets
3012	Confirmation
3013	A parameter set has not been set on the camera.
\nDo you still wish to exit parameter setting?
3014	Warning
3015	The settings to be deleted are set in the personal function.
\nDeleting will reset these to the default settings. Do you still wish to delete?
3100	Set1
3200	Set2
3300	Set3
4000	Exposure Functions 1
4001	Program AE
4002	Shutter-Priority AE
4003	Aperture-Priority AE
4004	Depth-of-field AE
4005	Bulb Exposure Mode
4006	Manual Exposure
4007	Evaluative Metering
4008	Partial Metering
4009	Spot Metering
4010	Center-Weighted Average Metering
4011	Cannot use %s
4100	Exposure Functions 2
4101	Error
4102	PFn.5 maximum and minimum values are invalid.
\nRestored previous settings.
4200	Exposure Functions 3
4300	AF Functions
4400	Drive Functions
4401	Camera settings dialog
4402	Value is out of range.
\nPlease set a value between 2 and 21.
4500	Other Functions 1
4501	Error
4502	Cannot change PFn.25 white balance settings to %s
4503	Error
4504	Cannot change P.Fn.25 parameter settings to %s.
4505	Camera settings dialog
4506	Value is out of range.
\nPlease set a value between 0 and 3600.
4550	Other Functions 2
4600	Other Functions 3
4900	Combination
4901	P.Fn-%02d-%d  
4902	  
4903	,
4904	 and 
4905	  
4906	  
4907	  
4908	  
5000	PC1
5001	PC2
5002	PC3
5003	%s: Already set (%s)
5004	%s: Not set
5005	Error
5006	Error reading WBD file.
6000	Error
6001	Error reading TCD data.
7000	?????????????????
7001	?????????????????
8000	Format complete.
8001	Finished formatting Memory card.
8002	Formatting failed
8006	Unable to format Memory card.
10000	This dialog can be used to set the parameter settings for the camera's creative zone.
\nParameter sets labeled Set1-Set3 can be applied to camera.
10001	Switches between parameter sets.
10002	Adjust the contrast.
10003	Adjusts the sharpness.
10004	Adjust the color saturation.
10005	Loads parameter set file to current set.
10006	Saves the selected parameter set to the computer.
10007	Uploads the current parameter set to the camera.
10008	Close the dialog.
10009	Add new parameter set to the camera.
10010	Delete current tab's set ( also from camera if applied ).